22
ENGLISH
Battery pack is defective. Remove the battery pack immediately from the charger.
The battery pack was not pushed correctly onto the sliding seat (2).
5
Care and Maintenance
RO RH4000:
The vent slots of the machine should be cleaned periodically.
Charger:
Repairs to the charger must only be carried out by qualified electricians.
If the mains connection cable of this tool is damaged, in order to prevent endangering personnel
and property it must be replaced by the manufacturer, or the Customer Service of the manufac-
turer, or a similarly qualified person.
6
Accessories
Accessory Name
ROTHENBERGER Part Number
Hammer drill SDS Plus, 5x110mm
111401
Hammer drill SDS Plus, 6x110mm
111405
Hammer drill SDS Plus, 6x160mm
111406
Hammer drill SDS Plus, 8x110mm
111411
Hammer drill SDS Plus, 8x160mm
111412
Hammer drill SDS Plus, 10x160mm
111419
www.rothenberger.com
7
Customer service
The ROTHENBERGER service locations are available to help you (see listing in catalog or on-
line) and replacement parts and service are also available through these same service locations.
Order your accessories and spare parts from your specialist retailer or using Ro online:
Phone:
+ 49 (0) 61 95 / 800 – 8200
Fax:
+ 49 (0) 61 95 / 800 – 7491
Email:
www.rothenberger.com
8
Disposal
Components of the unit are recyclable material and should be put to recycling. For this purpose
registered and certified recycling companies are available. For an environmental friendly dispos-
al of the non-recyclable parts (e.g. electronic waste) please contact your local waste disposal
authority.
Old batteries can be taken to your specialist dealer who will dispose of them in conformity with
environmental regulations.
For EU countries only:
Do not dispose of electric tools with domestic waste. In accordance with European
Directive 2012/19/EU on waste electrical and electronic equipment and its implementa-
tion as national law, electric tools that are no longer serviceable must be collected
separately and utilised for environmentally compatible recycling.