Roth DBT-001 User Manual Download Page 6

6    

 

|

    

 Roth DBT-001 User Manual

Listening To Your Radio continued

DAB manual tune 

To select manual tune, first press the 

MENU

 button to enter into the Tune Select Menu, then press on the 

Ok

 control to select “Manual tune”. 

(Figure 4) 

Rotate the 

Ok

 control to move through the 

DAB

 channels, the display will show “5A to 13F” and their associated frequencies. (Figure 5) 

When your desired frequency appears in the display, press on the 

Ok

 control to confirm. The name of the station group (ensemble/multiplex) 

will be displayed. To listen to the station selected, press on the 

Ok

 control again. 

DAB secondary services

On some occasions you will see a “>” symbol directly after the name of the station, this indicates that there are secondary services available 
to that station. These secondary services contain extra services that relate to the primary station. E.g. a sports station may want to add extra 
commentaries. The secondary services are inserted directly after the primary station. To select the secondary station, press on the 

Ok

 control once. 

DAB display modes

Every time you press the 

INFO

 button, the display will cycle through the following display modes: 

Time and date

 The time and date will be automatically updated by the broadcasted information; it is no need to set the clock manually. In 

the unlikely event that no clock information is received, the display will show “<TIME/DATE>”. 

Frequency

 The frequency of the present station will be displayed.  

Audio bit rate

 The display will show the digital audio bit rate being received. 

Signal strength 

The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be from left to right. 

DLS 

DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their transmissions. The 

message usually includes information such as programme details etc. 

Programme type 

This describes the style of the programme that is being broadcast. If the information is not available, the display will show 

“<Programme Type>”. 

Figure 4

Figure 5

Time and date

 

Frequency

Ensemble / Multiplex (Group Name)

Audio Bit Rate

Programme Type

Signal Strength

DLS

DBT-001 Manual VJ.indd   6

7/8/12   13:23:14

Summary of Contents for DBT-001













Reviews: