background image

rothaudio.co.uk    |    

5

USER MANUAl

ENgliSh

Proper disposal of this product. This label indicates that, 
in  the  EU,  electronic  devices  cannot  be  disposed  of 
with  regular  household  waste.  Please  use  the  return  or 
collections  systems  of  your  municipality  or  contact  the 
seller where you purchased this product

CAUTiON

Never remove the back covers of the SoundCore as this can 
expose you to very high voltages and other hazards. If the 
system does not operate properly, unplug the audio system 
and call your authorised dealer or service centre for advice. 
Adjust only those controls that are covered in the instructions. 

wARNiNg

to reduce the risk of fire or electric shock, do not expose this 
SoundCore to rain or moisture.

the system should not be exposed to dripping or splashing 
and objects filled with liquids, such as vases, should not be 
placed on the system. 

this SoundCore should only be connected to a mains socket 
outlet with a protective earthing connection.

ElECTRiCAl iNFORmATiON

this system is fitted with a BS1363/A 13 amp plug. If it 
is not suitable for your supply sockets it must be removed 
and replaced with an appropriate plug. If the plug becomes 
damaged and/or needs to be replaced please follow the 
wiring instructions below. the plug removed must be disposed 
of immediately. It must not be plugged into a supply socket 
as this will be an electrical hazard. If the fuse needs to be 
replaced it must be of the same rating and AStA approved 
to BS1362. If the plug is changed, a fuse of the appropriate 
rating must be fitted in the plug, adapter or at the distribution 
board. If the fuse in a moulded plug is replaced, the fuse cover 
must be refitted before the appliance can be used.

to prevent the risk of electric shock.

do not open this product.

no user- serviceable parts inside.

refer servicing to qualified service personnel.

risk of electric shock

do not open

Caution 

CAUTION 

to prevent electric shock do not plug a cable into 

a wall outlet, extension cord, or other receptacle unless the metal 
blades can be fully inserted to prevent blade exposure.

wiRiNg iNSTRUCTiONS

Follow the appropriate wiring instructions given below. In both 
cases ensure that the outer sheath of the cable is firmly held 
by the cable clamp.

the exclamation point within an equilateral triangle is 
intended to alert the user to the presence of important 
operating and maintenance (servicing) instructions in the 
literature accompanying the appliance.

the lightning flash with arrowhead symbol, within an 
equilateral triangle, is intended to alert the user to the 
presence of uninsulated “dangerous voltage” within the 
SoundCore’s enclosure that may be of a sufficient magnitude 
to constitute a risk of electric shock.

2 - CORE plUg

wARNiNg! 

Do not connect either wire to the earth terminal.

 

This symbol indicates that this 2-core 
appliance is Class II and does not require an 

earth connection. 
The wire coloured blue must be connected to the 
terminal marked with the letter N or coloured black. 
The wire coloured brown must be connected to the 
terminal marked with the letter L or coloured red.

Blue  

(Neutral)

Fuse

Brown  

(Live)

wARNiNg! 

This appliance must be earthed.

3 - CORE plUg

The wire coloured green and yellow must be 
connected to the terminal marked with the letter 
E, or by the earth symbol   or coloured green or 
green and yellow.
The wire coloured blue must be connected to the 
terminal marked with the letter N or coloured black.
The wire coloured brown must be connected to the 
terminal marked with the letter L or coloured red.

Blue  

(Neutral)

Fuse

Brown  

(Live)

Green & 

Yellow  

(Earth)

Roth Neo 6.2 SoundCore Manual UK EM.indd   5

06/05/2014   13:19

Summary of Contents for NEO 6.2 SoundCore

















Reviews: