background image

USER MANUAL

 

ENGLISH

rothaudio.co.uk  

|  13

Hookup Diagram

TV Audio Hookup - Case 1

If your TV has a headphone output, plug the supplied 3.5 mm mini stereo cable into the headphone output from your 
TV and plug the other end to the Input 3 jack on the back of your BAR1.

TV Audio Hookup - Case 2

If your TV does not have a headphone output and you are using a set top box, plug one end of the included RCA cable 
into the audio outputs from your set top box and plug the other end into Input 1 on the back of your BAR1.

Audio Hookup - Other Device

The Input 2 can be attached to Blu-ray, DVD or CD players. It can also be used to connect devices such as MP3 players 
or Home Video Game systems.

BAR1

To Input 2 (RCA jack) of BAR1  

RCA Cable 

 

To Audio Output  

Other Device

Blu-ray Players 

DVD Players 

CD Players 

MP3 Players 

Home Video Game 

Systems  

BAR1  Rear  Connectors   

BAR1

RCA Cable (Supplied)  

To Audio Output of 
Set Top Box or TV

  

To Input 1 (RCA jack) of BAR1

  

[Note]    
Some TV’s do not have a headphone  

output but do have Audio outputs with  

RCA jacks. You can connect them to 

Input 1 by using the RCA cable. This  

will also work fine except that the  BAR1 

volume must now be  adjusted using 

the BAR1 remote.  

Set Top Box

  

Or TV

  

BAR1  Rear  Connectors   

3.5 mm Mini  Stereo Cable 

(Supplied)  

To Headphone 

output of TV  

To Input 3 (Mini Stereo 

jack) of BAR1  

BAR1

BAR1  Rear  Connectors   

Roth SoundBar Manual EH.indd   13

7/3/11   11:20:17

Summary of Contents for BAR 1

















Reviews: