Rotenso Roni R26W, User Manual

Page: 84 / 176

52
User manual
Room air conditioner - RONI X
EN
PART 5. OPERATING INSTRUCTIONS
Fig. 29
13. SELF-CLEAN FUNCTION
Press OPTION at the first time, select the CLEAN by press-
ing the button or until symbol CLEAN is flashing;
Press OPTION again to activate the CLEAN function, and
appears on the display.
Do it again to deactivate this function.
1. This function help carry away the accumulated
dirt, bacteria, etc from the evaporator.
2. This function will run about 30 minutes, and it will back
to the mode set before this function. You can press to
cancel this function during the process. You will hear 2
beeps when it's finished or cancelled.
3. It's normal if there are some noise during this function
process, as plastic materials expand with heat and con-
tract with cold.
4. We suggest operate this function as the following am-
bient. Condition to avoid certain safety protection
features.
5. We suggest operate this function per 3 months.
Indoor unit Temp < 30°C
Outdoor unit 5°C < Temp < 30°C
Fig. 28
14. MILDEW FUNCTION (OPTIONAL)
Press OPTION at the first time , select the MILDEW by
pressing the button or until symbol MILDEW is flashing;
Press OPTION again to activate the MILDEW function, and
MILDEW appears on the display.
Do it again to deactivate this function.
This function enable the air conditioner still blow airflow
about 15 minutes to dry the indoor inner parts to avoid
mildew, when the air conditioner is off.
NOTE:
MILDEW function only available in DRY/COOLING mode