76
User manual
Room air conditioner - IMOTO X
EN
7.3. SLEEP function
Press SLEEP button to enter the energy efficient mode.
The SLEEP function is used to decrease energy use while you sleep (and don’t
need the same temperature settings to stay comfortable). This function can
only be activated via remote control.
NOTE:
The SLEEP function is not available in FAN or DRY mode.
7.4. Silence function
Keep pressing Fan button for more than 2 seconds to activate/disable Silence
function (some units).
Due to low frequency operation of compressor, it may result in insufficient cooling
and heating capacity. Press ON/OFF, Mode, Sleep, Turbo or Clean button while
operating will cancel silence function.
2s
7.5. ECO function
Press ECO button to enter the energy efficient mode.
NOTE:
This function is only available under COOL mode.
Under cooling mode, press this button, the remote controller will adjust the temperature automatically to
24° C/75°F, fan speed of Auto to save energy (only when the set temperature is less than 24°C/75°F).
If the set temperature is above 24°C/75°F, press the ECO button, the fan speed will change to Auto, the set
temperature will remain unchanged.
NOTE:
Pressing the ECO button, or modifying the mode or adjusting the set temperature to less than 24°C/75°F will stop
ECO operation.
Under ECO operation, the set tmeperature should be 24°C/75°F or above, it may result in insufficient cooling. If you
feel uncomfortable, just press the ECO button again to stop it.
PART 5. REMOTE CONTROL SUPPORT
