58
User manual
Room air conditioner - IMOTO X
EN
PART 2. OPERATING THE DEVICE
REMEMBER
1. The device will achieve the highest efficiency in the above temperature ranges. If the air conditioner
operates at temperatures outside the above mentioned range, some safety functions may be
activated, causing the device to operate unnaturally.
2. If the air conditioner is used for a long time in an environment with high humidity (exceeding 80%),
water droplets may drip. In this situation, it is recommended to set the maximum opening angle of the
vertical blinds (vertically to the floor) and start the fan at high speed (HIGH).
3. MANUAL OPERATION OF THE DEVICE
The indoor units have a button to control the device during a remote control failure. You can get to it by
opening the front panel. The button should only be used if a wireless remote control fails or needs service.
AUTO/COOL
Control button
manual
Control button
manual
AUTO/COOL
Bracket
REMEMBER
Turn off the device before using the manual control button. If
the unit is in operation, press the manual control button until
it turns off.
1. Open and lift the front panel until you hear a click indicating
that the panel is locked. For some models, use the bracket
supporting the panel.
2. Pressing the button once will cause the unit to start in cooling
mode. Pressing the button twice will start the heating mode,
and pressing the button three times will turn off the unit.
3. Close the panel.
ATTENTION
The button should only be used in an emergency. To return to the
remote control, simply start using it again.
