Rotenso I31W, User Manual

Page: 9 / 16

IONE W - Air purifier
9
User manual
PART 5. FILTER AND WATER TANK REPLACEMENT
1. FILTER REPLACEMENT
If the filter needs to be replaced, the filter change indicator will blink on the
purifier panel
(Pic. 5) .
To replace the filters:
1. Disconnect the power supply and remove the panel (Pic. 6).
2. Remove the elementary filter layer (Pic. 7), EPA filter layer (Pic. 8) and
Activated carbon filter layer (Pic. 9) prepare them for the handle.
3. Install the new filters .
4. Close the front panel .
5. Long press for 3s to renew the filter service program.
Pic. 5
Pic. 6 Pic. 7 Pic. 8 Pic. 9
2. THE HUMIDIFIER FUNCTION
To fill the tank with water:
1. When water is shortage, the “water“ word is light up to remind
injecting water (Pic. 10) .
2. Pull put water tank,take out the wet cotton, inject water (Pic. 11) .
3. Open cover, clean the water tank (Pic. 12) .
4. Refill the tank with clean water and put it back in the device.
Water
shortage
Water
Timing Particles Speed
Child Lock Sleep
Pic. 10
Pic. 11 Pic. 12