Page 8 of 82 Revision No.: 1.5
3) User Interface
1.
Front Panel
Fig. 1: Front Panel
Available Keys
Every item is explained according to its' number seen in
Fig. 1
.
1.
Main menu screen.
2.
Alarm LED – is activated when one or more alarm conditions are detected.
The LED is turned off after doing 'Reset' and by that is acknowledged. When
the LED is off the controller will show Normal state, and all alarms are in
reset mode in all houses.
3.
P.C. LEDs – when their lights turn on indicates an existence of PC
communication
.
▪
'Com 1 TD': indicating communication in PC TD.
▪
'Com 1 RD': indicating communication in PC RD.
4.
Modem LEDs – when their lights turn on, indicates an existence of Modem
communication.
•
'Com 2 TD': indication communication in PC TD.
•
'Com 2 RD': indicating communication in PC RD.
•
'Com 2 DTR': indicating the modem communication operates well.
•
'Com 2 DCD': indicating communication in DCD.
5.
Output LEDs – when their lights turn on, indicates the relay's status.
6.
Cellular LEDs – when their lights turn on indicates an existence of Cellular
communication.
Summary of Contents for communicator
