52
53
4. Programming
You can re-program the following settings:
Filter – Water hardness – Temperature – Times – Language – Rinsing at switch-off –
ECO mode
☛
In the «First Operational start», you already had the opportunity to program the
Language, the Filter-Settings and the Water hardness.
4.1 Filter
Operating the appliance with filter:
With this appliance, you receive a special filter for the water tank as an accessory. With
the correct use of this filter, you will not have to descale your coffee machine as often.
In order for the appliance to know that the filter has been installed, you must program
the filter setting to «Yes». The factory setting is without filter.
☛
If you use the filter in your machine and you have programmed the system to
«Yes», the programming for water hardness will no longer be displayed.
In the Main menu, turn the Control button (2) to the symbol:
Settings
• Press the Control button to confirm.
• Turn the Control button to «Filter» and press it to confirm.
• Turn the Control button to «Insert filter? Yes».
• Press the Control button to confirm the entry. «Insert filter» appears in the display.
• Empty the water tank (14) and carefully screw the filter into the provided holder (19)
using the mounting tool (18 ).
• Fill the tank with fresh water and put it back into the coffee machine.
• Place a sufficiently large receptacle under the outlet (5) and press the Control button.
The system will now be rinsed and «Rinsing filter» appears on the display.
• Wait until no more water comes out of the outlet, and «Filling the system» appears
on the display.
• Press the Control button again. The appliance rinses and is then ready for operation.
☛
The filter will remain effective for the drawing of approx. 50 litres of water. The
display will indicate when the filter should be changed (see Chapter 5.6).
Important
: Even if this message does not appear, the filter must be changed after two
months at the latest, even if the machine has only been used a few times.
Operating the appliance without the filter:
If you no longer want to use the filter, it is essential that the filter setting is programmed
back to «No» again. This is important, as the descaling must be carried out without the
filter.
• Turn the Control button (2) to «Prop. coffee». The set percentage starts blinking.
• Turn the Control button until the desired percentage and confirm it by pressing the
Control button. The set number stops blinking.
☛
When you change the «Prop. coffee», the values of «Amount milk» and
«Amount frothy m.» will be adapted automatically.
Amount of frothy milk for Cappuccino, Latte Macchiato and warm milk
☛
You do not need to add the milk separately when preparing Cappuccino and
Latte Macchiato; the appliance will do this automatically (see Points 3.3 and 3.4).
You can determine how much frothy milk you would like in relation to the total
amount (in ml).
• Turn the Control button (2) to «Amount frothy m.». The set amount starts blinking.
• Turn the Control button until the desired amount appears, and confirm it by pressing
the Control button. The set amount stops blinking.
☛
Cappuccino: If you change the «Amount frothy m.», the «Prop. coffee» will be
adapted automatically.
☛
Latte Macchiato: If you change the «Amount frothy m.», the «Amount milk» will
be adapted automatically.
Milk amount for Latte Macchiato
You can determine how much milk and how much frothy milk you would like in the
preparation of Latte Macchiato.
• Turn the Control button (2) to «Amount milk». The set amount starts blinking.
• Turn the Control button until the desired amount appears, and confirm it by pressing
the Control button. The set amount stops blinking.
☛
If you change the «Amount milk», the «Amount frothy m». will be automatically
adapted.
☛
The total amount of «Amount milk» and «Amount frothy m». always remains in
the same ratio to the percentage setting of «Prop. coffee». For example, if you
enter 300 ml as the «Amount total» and 20% for «Prop. coffee», the sum of
«Amount milk» and «Amount frothy m.» will always be 240 ml.
Temperature
☛
This display will only appear for each type of preparation if you have pro-
grammed the «Temperatures» menu point in «Settings» to «Individual».
You can set the coffee temperature to «Normal», «High» and «Maximum».
• Turn the Control button (2) to «Temperature». The set level starts blinking.
• Turn the Control button until the desired level appears, and confirm it by pressing
the Control button. The set level stops blinking.
14_0731_ROT_U2785Ch_BA_Universa_Inhalt.indd 52-53
14_0731_ROT_U2785Ch_BA_Universa_Inhalt.indd 52-53
22.05.14 15:31
22.05.14 15:31
