8
RLC-1040
Power Conditioner
Setting Up the RLC-1040
Use the front panel
Setup
and
Select
buttons
-
=
to configure the various features and
functions of the RLC-1040
Dimmer Function
This function sets the brightness level of the front
panel LCD Display and the LED indicators. Press
the
Setup
button once to access the Dimmer
Function display.
������������������
������������������
Once the display is shown, repeatedly pressing
the
Select
button allows you to set the brightness
of the display. The brightness level can be set to:
Off, Dim 3, Dim 2, Dim 1, Normal, Bright 1,
Bright 2 and Bright 3. Once the Display bright-
ness is at the desired value, press the
Setup
button to store the setting.
AVR Range Function
Allows you to adjust the AVR (Automatic Voltage
Regulation) system of the RLC-1040. It can be
set to: Narrow, Normal or Wide.
Narrow AVR Range
– Takes input voltages
from 100-132 VAC and regulates it to 120 VAC
± 5%. Use this setting if the power input voltage
is fairly stable.
Normal AVR Range
– Takes input voltages
from 97-139 VAC and regulates it to 120 VAC
± 10%. Use this setting if the power input voltage
has moderate variations
Wide AVR Range
– Takes input voltages
from 92-145 VAC and regulates it to 120 VAC
± 15%. Use this setting if the power input voltage
has large variations
The “Vin” line of the “Voltage Input/Output”
display (see preceding page) will show you how
much the input voltage varies.
Press the
Setup
button until the “SET AVR
RANGE ?” menu is displayed.
������������������
������������������
Then press the
Select
button to change the AVR
Range setting. After you have selected the AVR
Range setting you want, press the
Setup
button
to accept the setting.
Delay Time Function
This function sets the amount of time that elapses
before the RLC-1040 provides power to the rear
panel outlets marked
Delayed
. The same amount
of time will elapse before the RLC-1040 removes
power to the Delayed outlets.
Press the
Setup
button until the “SET DELAY
TIME ?” menu is displayed.
������������������
������������������
Then press the
Select
button to select the amount
of delay - from 0 to 12 seconds). Press the
Setup
button to store the setting.
Beeper Function
This function turns the beeper sound on or off.
When the beeper sound is on, each press of the
Setup
or
Select
button will be accompanied
by a beep.
Repeatedly press the
Setup
button to advance
to the “SET BEEPER ?” menu.
������������������
������������������
Press the
Select
button to toggle the beeper
between
ON
and
MUTE
. Press the
Setup
button to store the setting.
Language Function
This lets you select the language for the LCD
display. Repeatedly press the
Setup
button to
advance to the “SET LANGUAGE” display.
������������������
������������������
Press the
Select
button to select the language
– English, French or Spanish.
������������
������������������
������������
������������������
������������
������������������
Press the
Setup
button to store the setting.
