background image

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT. INSERT FULLY.

APPLICABLE FOR USA, CANADA OR WHERE
APPROVED FOR THE USAGE

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU AU FOND.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING:
There are no user serviceable parts inside. Refer all servicing to
qualified service personnel.

WARNING:
To reduce the risk of fire or electric shock, do not expose the
RCD-951 to moisture or water. Do not allow foreign objects to get
into the enclosure. If the unit is exposed to moisture, or a foreign
object gets into the enclosure, immediately disconnect the power
cord from the wall. Take the unit to a qualified service person for
inspection and necessary repairs.

Read all the instructions before connecting or operating the RCD-951. Keep this
manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and on the
product itself. Follow all operating instructions.

Clean the RCD-951 only with a dry cloth or a vacuum cleaner.

Keep the ventilation inlets on the unit unobstructed. For example, do not place
the unit on a bed, sofa, rug, or similar surface that could block the ventilation
slots. If the RCD-951 is placed in a bookcase or cabinet, there must be sufficient
clearance around the unit and ventilation of the cabinet to allow proper cooling.

Keep the RCD-951 away from radiators, heat registers, stoves, or any other
appliance that produces heat.

The RCD-951 must be connected to a power supply only of the type and voltage
specified on the rear panel of the unit.

Connect the RCD-951 to the power outlet only with the supplied 2-pin polarized
power supply cable or an exact equivalent. Do not modify the supplied cable in
any way. Do not attempt to defeat grounding and/or polarization provisions. The
cable should be connected to a 2-pin polarized wall outlet, matching the wide
blade of the plug to the wide slot of the receptacle. Do not use extension cords.

Do not route the power cord where it will be crushed, pinched, bent at severe
angles, exposed to heat, or damaged in any way. Pay particular attention to the
power cord at the plug and where it exits the back of the unit.

The power cord should be unplugged from the wall outlet if the unit is to be left
unused for a long period of time.

Immediately stop using the RCD-951 and have it inspected and/or serviced by a
qualified service agency if:

• The power supply cord or plug has been damaged.
• Objects have fallen into or liquid has been spilled into the unit.
• The unit has been exposed to rain.
• The unit shows signs of improper operation
• The unit has been dropped or damaged in any way

Place the RCD-951 on a fixed, level surface strong
enough to support its weight. Do not place the
RCD-951 on a moveable cart that could tip over.

This symbol is to alert the user to the
presence of uninsulated dangerous
voltages inside the product's enclosure
that may constitute a risk of electric shock.

This symbol is to alert the user to important
operating and maintenance (service)
instructions in this manual and literature
accompanying the product.

DANGER: INVISIBLE LASER RADIATION WHEN YOU OPEN THE
TOP COVER. AVOID DIRECT EXPOSURE TO LASER BEAM.

CLASS 1 LASER PRODUCT
Complies with DHHS 21 CFR 1040.10 and 1040.11

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED IN THIS MANUAL MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.

Summary of Contents for RCD-951











Reviews: