5
6. Bleed mobile columns:
a.) Raise forks 150-200mm do not lift forks high enough to engage locks.
b.) Loosen bleed screw to release air from system.
c.) Close screw and repeat steps a and b until there is no air in the system and fluid runs clear.
Bleed Screw
Do Not Exceed Torque Values
On Bleeder Screw
Torque Values: 177-230 In/Lbs (20Nm-26Nm)
IMPORTANT
Summary of Contents for HydroLift MC75
Page 9: ...9 Fig 3 Fig 4 Fig 2 Power Up Switch...
Page 18: ...18 HYDRAULIC SCHEMATIC...
Page 19: ...19 NOTES...
