7
WARNING
If you are not completely familiar
with automotive lift maintenance procedures
STOP:
Contact factory for instructions.
To Avoid Personal Injury, permit only qualified lift
service personnel to perform maintenance on this
equipment.
Use only genuine Rotary replacement parts for
repairs.
• Always
keep all bolts tight. Check periodically.
• Always
raise lift when cleaning floor area.
• Always
keep lift clean.
• Daily:
Inspect adapters for damage or excessive
wear. Replace as required with genuine Rotary
parts.
• Weekly:
Inspect all lift parts for signs of damage
due to overloading and rough handling.
• Monthly:
Lightly grease adapter sliding surfaces.
• Monthly:
Releave residual pressure in the slave
cylinders by loosening the slave circuit shut-off
valves, screws A2 - B2. When complete tighten
screws A2 - B2.
• Semi-Annually:
Check fluid level of lift power unit.
Refill if required per lift installation instructions. If
fluid is required, inspect all hoses and seals. Repair
as required.
• If lift
stops short of full rise or chatters, check fluid
level and purge both cylinders per lift installation
instructions.
• Replace
all CAUTION, WARNING, or SAFETY related
decals on the lift if unable to read or missing.
Reorder labels from Rotary Lift.
MAINTENANCE INSTRUCTIONS
