USER'S AND
MAINTENANCE
MANUAL
Date:
01/31/2020
Code
MAN D185T4F-DB
ENG
Air Compressor : D185T4F-DB
Revision 03
Copyright © 2014, ROTAIR S.P.A. - All rights reserved
.
This manual is intellectual property of ROTAIR S.P.A.
Its full or partial reproduction is forbidden under any form, on any support and by any means, without the
written authorization by ROTAIR S.P.A.
Page
58/59
16 ELIMINATION OR DISPOSAL OF THE MACHINE
16.1 Instructions for dismantling
To dismantle the machine safely, proceed as follows:
1)
Place the machine in a large area and make sure it is turned off.
2)
Drain all liquids from all the tanks, including engine oil, fuel, coolant, and hydraulic oil and store them in
safety containers. For disposal of these types of waste, follow the next paragraph.
3)
Loosen the screws of the body panels and remove all covers.
Remove all the components of the machine one by one
,
dividing them according to their material
composition. The various components of the machine have to be disposed of based on the type of
waste they contain.
The following describes the different types of waste that can be generated during the life of the machine:
1)
Waste motor oil
2)
Waste hydraulic oil
3)
Engine
coolant
4)
Diesel
fuel
5)
Electrolyte from the
battery
6)
Rags or paper impregnated with
solvents
or other substances used
to
clean various
parts
of the machine
17 ELIMINATING THE MACHINE
The operations of destruction and disposal must be carried out in a safe condition by a qualified specialist
and after carefully reading and incorporat
ing
the recommendations and instructions provided in this section of
the manual of use and maintenance and consulting the safety data sheets relating to substances in the
machine mentioned in the previous chapter.
Once you reach the end of the mechanical life of the compressor, it has to be taken out of service so that it
cannot be used for other purposes.
