Rotabroach RHINO 4, Operator'S Manual

Page: 4 / 22

Issue 3 July 2004
- - 3
[2]
SAFETY PROCEDURES
READ BEFORE USING THE MACHINE
•
ALWAYS WEAR SAFETY GOGGLES AND EAR DEFENDERS WHEN
OPERATING THE MACHINE.
•
Ensure motor is switched off when changing cutters, working on the machine, or
removing swarf.
•
Always ensure the cutter is securely fastened.
•
Remove tie, rings, watches and loose adornments, which might entangle with the rotating
machinery.
•
Should the cutter become fast in the workpiece, switch off the motor immediately to
prevent personal injury. Do not attempt to free the cutter by starting and stopping the
motor.
•
If the machine is accidentally dropped, always thoroughly examine the machine for signs
of damage and check that it functions correctly before trying to cut a hole.
•
Regularly inspect the machine and check that nuts and screws are tight.
•
Before fuelling the tank, read section 5 (fuelling)
•
Observe local and national Health & Safety requirements before operating the machine.
•
Never leave the machine lying on its side. The motor sump oil may be lost at an
inclination greater than 20
˚ from the vertical. If this may have happened, check the sump
oil level before starting the engine.
•
Always wear approved eye and ear protection when the equipment is in operation.
Failure to do so may result in personal injury.
•
On completion of the cut, a slug will be ejected. DO NOT operate the machine if the
ejected slug may cause injury.