Rostra Precision Controls, Inc. - 2519 Dana Dr. - Laurinburg, NC 28352 - 800-782-3379 - rostra.com
Page 13
Replace the touch screen unit and factory CD player.
Make sure no wires are pinched in the process.
If indoors, start the vehicle and move it outside so that the
GPS antenna has a clear view of the sky. Press the
mute/call decline button to switch from the factory
interface to the iGo Navigation interface.
Reassembly
1.
Reinstall all trim pieces taking special care to ensure harnesses and wiring connections are properly secured.
2.
Make sure no harnesses are bent or pinched by trim pieces.
3.
Reconnect all disconnected bulbs and check for function.
Installation Tips
•
Confirm proper cable extension connector orientation and always verify proper ends are routed in correct direction.
•
It is a good idea to dry-fit all pieces in this kit before permanently attaching them to ensure proper orientation and
operation before beginning installation for familiarization with components.
•
Always treat any metal exposed during installation with a rust preventative compound to prevent system failure due to
rust and/or corrosion.
•
Always seal any holes drilled with the provided sealing putty to prevent water infiltration through unprotected areas.
•
Confirm integrity of mechanical and electrical connections before moving to next installation sequence.
Installation Notes
_____________________________________________________________________________
_____________________________________________________________________________
_____________________________________________________________________________
