For
a�er
sal
e
s s
e
rvic
e
, pl
e
as
e
contact Cypr
e
ss M
e
dic Sdn Bhd (
www.cypr
e
ss
me
dic.com.my
)
Cleaning Procedure
Rinsing technique
(performed a
�
er each treatment or before
fi
rst use).
1. Make sure that the power-switch has been turned to the “OFF” posi
�
on and the unit has been
disconnected from the power source.
2. Disconnect the air tube from the nebulizer device.
3. Gently twist and pull up the cover of the nebulizer kit to open and separate.
4. Rinse the nebulizer kit and components with hot tap water.
5. Dry with clean towels or completely air dry.
6. Reassemble the nebulizer kit.
NOTE
: For the
fi
rst
�
me cleaning or a
�
er the unit has been stored for an extended period of
�
me, thoroughly
clean all components, including the air tube. The nebulizer kit is dish-washer safe.
Cleaning the compressor
Wipe the compressor daily using a so
� c
loth.
NOTE
: Any other form of cleaning or cleaning agents may damage the
fi
nish of the unit.
Changing the air filter
It is important to change the air
fil
ter approximately when the air
fil
ter turns gray. It is recommended to
change air
fil
ter every 2 months.
1. Remove the air
fil
ter cover by gently pulling forward.
2. Discard the gray
fil
ter.
3. Replace with a new, clean air
fil
ter.
4. Securely re-a
�
ach the air
fil
ter cover to the unit.
NOTE
: Air
fil
ters cannot be cleaned or washed. Only NB80 air
fil
ters can be used. Do not subs
�
tute alternate
material such as co
�
on. Do not operate without an air
fil
ter.
