2. Insert 2 anchors provided into the drilled holes.
3. Mount the bracket on the wall using the 2 screws provided.
4. Mount the reader on the bracket and fasten at bottom with Torx screw and Torx screwdriver provided.
3.2. Wiring the Multi-Smart™ Readers
To wire Multi-Smart™ Readers:
Units are supplied with a 11 conductor 58 cm (22.8 in.) pigtail with exposed wires coated with solder.
•
The individual wires from the reader are color coded according the Wiegand standard.
•
When using a separate power supply for the reader, this supply and that of the controller must have a
common ground.
•
The reader’s cable shield wire should be preferably attached to an earth ground, or a signal ground
connection at the panel, or power supply end of the cable.
Multi-Smart™ Readers Installation & User Guide
3
