Additional Programmer Utilities
CP-R25 Hardware and AS-B01 Software Manual
31
6.1.2
Reading an ID from a User Card
This utility is used to ensure that the Mifare
®
User Card is configured properly.
This option is only available for the
Sector
Operation Mode
.
To read an ID from a Mifare
®
User Card:
1.
Select either the
Sector Reader
or
CP-R25
tab.
2.
In Operation Mode
, select
Sector
.
3.
Select the
Card Type
, either
Mifare
®
1 K
or
Mifare
®
4 K
.
4.
From the
Transmit Format
dropdown menu, select the applicable
transmission format.
5.
In
Operations
, select
Card utilities
.
6.
From the
Operation Type
field dropdown menu, select
Read ID from
User Card
.
Figure 13: Read ID from User Card
The
KeyA
and
User Card ID
fields appear.
7.
Enter the
KeyA
of the card being read.
8.
Place the Mifare
®
User Card on the CP-R25 Desktop Programmer antenna
area.
9.
Click
Start
to display the card ID in the
Mifare
®
User Card ID
field.
6.1.3
Programming a User Card ID
This utility is used to program the User Card ID into a specific location on the
User card without configuring the card template or KeyA.
This option is only available for the
Sector
Operation Mode
.
To program an ID into a Mifare
®
User Card:
1.
Select either the
Sector Reader
or
CP-R25
tab.
2.
In Operation Mode
, select
Sector
.
3.
Select the
Card Type
, either
Mifare
®
1 K
or
Mifare
®
4 K
.
4.
From the
Transmit Format
dropdown menu, select the applicable
transmission format.
5.
In
Operations
, select
Card utilities
.
6.
From the
Operation Type
field dropdown menu, select
Program ID into
User Card
.
