Programming Cards and Tags
CP-R25 Hardware and AS-B01 Software Manual
25
If the programming fails, there is a short buzz and the Swipe Card Reader
LEDs light red for three seconds.
5.2.2
Fingerprint Swipe Reader Configuration Cards
The Fingerprint Swipe Reader Configuration card allows you to create a
Configuration card to configure the various Fingerprint Swipe readers such as
the AY-B1663, AY-B3663, and AY-B4663.
To prepare a Biometric Swipe Configuration Card:
1.
Select the
CPR-25
tab.
2.
In
Operation Mode
, select either
Sector
or
Card Serial Number (CSN)
.
3.
In
Card Type
, select either
Mifare
®
1 K
or
Mifare
®
4 K
.
4.
From the
Transmit Format
dropdown menu, select the applicable
transmission format.
5.
For
Sector
operation mode, define the
ID Location
using the
Sector
Number
,
Block Number
, and
Byte Number
fields.
6.
From the
Operation Type
dropdown menu, select
Program
Configuration Card
.
7.
Ensure that the
Operations
is set to
Program Card
.
8.
Define the
Led and Buzzer Control
behavior by selecting or clearing the
Enable Led
and
Enable Buzzer
checkboxes.
9.
To enable the
Lockout
feature:
a.
Select the
Enable
checkbox.
b.
Define the lockout behavior using the
Attempts
and
Duration
fields.
10.
For reports on operational failures, select the
Enable
checkbox under
Failed operation reporting
.
11.
In
KeyA
, enter the KeyA to be used by the reader as the unique KeyA for
the organization or site in both the
Reader KeyA
and the
Confirm
Reader KeyA
fields.
The KeyA number is hidden by "*" characters, so write down the new key
and keep it in a safe place to avoid exposing this secret key to unauthorized
personnel. The KeyA value is entered as a 12 hexadecimal digit. The default
KeyA is FFFFFFFFFFFF.
12.
Place a blank Mifare
®
card or a card previously configured as a
Configuration Card on the CP-R25 Desktop Programmer antenna area.
13.
Click
Start
to begin programming the Mifare
®
card.
On completion, a message appears in the Message Log area to verify that
the programming succeeded.
If the programming fails, there is a short buzz and the swipe Card Reader
LEDs light red for three seconds.
