Editing a Panel Account
30
HomeLogiX™ HLX-40 Software Manual
Property Item
Description
Abort Window
Select Enabled or Disabled to allow the zone to abort an alarm
event during the Alarm Abort Window defined in the system.
The default setting is Enabled.
5.3
Enrollment
The installer can enroll all detectors, remotes, sirens, and so on either from the
control panel or using the software and then downloading the information
into the panel.
To access Enrollment:
1.
In the Panel Tree, select a panel account.
2.
Click
Enrollment
below the panel account name.
3.
After enrolling the units or modifying the properties, save the
configuration (see Section
4.3).
4.
Once you have finished enrolling or modifying the properties, download
the latest configuration to the wireless panel (see Section
6.3).
The enrollment of the wireless units is done by typing the part number of the
wireless unit in the # RF ID field for each of the enrolled units, detectors,
remote controls, remote keypads, repeaters, and wireless sirens.
The following properties are available under Enrollment:
Table 9: Editing a Panel – Enrollment
Section
Property Item
Description
Detector
Detector # Type
The device family type for the detector of the
zone.
Detector # RF ID
The identification number of the wireless
detector.
Detector 40 (Wired)
State
Allows you to enable or disable the use of a
wired detector.
Remote
Controls
Remote Control # RF ID The identification number of the remote
control.
Remote Control # Panic
Button Function
Set the function for the remote control panic
button to activate the PGM.
Remote Control # On
Button Function
Set the function for the remote control On
button to activate the PGM.
Remote Control # Off
Button Function
Set the function for the remote control Off
button to turn off the PGM.
Remote Control #
Home Button Function
Set the function for the remote control Home
(partial) button.