background image

Deleting Primary & Secondary Codes

There are two methods to delete Primary and Secondary codes, the
Standard Method and the Code Search Method.

When deleting a User Slot, both the Primary Code and the
Secondary code are erased.

Enter Programming Mode

Press

to enter

The Mode LED will turn red

Enter the 3-digit User Slot
codes you wish to delete.

The Mode LED will flash red

Indicating the controller is
waiting for the Programming
Code to confirm the deletion.

If the User Slot is empty you will hear a long beep and the
AC-C31 will return to Normal Mode

Enter your Programming Code to
confirm the deletion.

If the Programming Code is valid, you will hear three beeps
and the AC-C31 will return to Normal Mode.

If the Programming Code is invalid, you will hear a long beep and
the AC-C31 will return to Normal Mode.

- It is recommended that a record be kept of added and

deleted users so that it will be easier to keep track of
which user slots are empty and which user slots are not.

Deleting Primary and Secondary Codes using the Standard
Method

1)

2)

"8"

Menu 8

3)

4)

Note:

!

!

Page 26

06/01

AC-C31

Page 27

06/01

Deleting Primary and Secondary Codes using the Code Search
Method

1)

2)

"8"

Menu 8

3)

4)

Note:

Enter Programming Mode

Press

to enter

The Mode LED will turn red

Enter the 3-digit User Slot 000

The Door LED will flash orange

The controller is now waiting for the Primary Code of the User
you want to delete.

Enter the 4-digit PIN Code of the

Primary Code belonging to the
User you want to delete.

The Mode LED will flash red

If the Programming Code is valid, you will hear three beeps
and the AC-C31 will return to Normal Mode.

If the Programming Code is invalid, you will hear a long beep and
the AC-C31 will return to Normal Mode.

- It is recommended that a record be kept of added and

deleted users so that it will be easier to keep track of
which user slots are empty and which user slots are not.

!

!

!

AC-C31

Mode

Door

GREEN

Mode

Door

GREEN

Mode

Door

ORANGE

RED

? ? ?

Mode

Door

? ? ? ?

ORANGE

RED

Mode

Door

ORANGE

RED

0 0 0

Mode

Door

ORANGE

RED

? ? ? ?

Mode

Door

ORANGE

RED

Summary of Contents for AC-C31


















Reviews: