manualshive.com logo in svg

Rosslare AC-825IP, Hardware Installation And User'S Manual

Share
Download
Rosslare AC-825IP Hardware Installation And User'S Manual Download Page 43

Communications 

AC-825IP Hardware Installation and User Guide 

43 

6.

 

Communications 

Communication lines are used to upload and download information between 

the AC-825IP panel and the AxTraxNG server using an IP network. 

6.1

 

TCP/IP Network Connection 

The computer running the AxTraxNG server can communicate with the access 

control panels via an IP network. The connection settings are controlled within 

the AxTraxNG Client software. 
AC-825IP panels connect to the IP network using an onboard network module. 

6.1.1

 

LAN and WAN Requirements 

The devices can be connected to an IP network using any valid network 

address. 
Figure 29 illustrates the connection of a single AC-825IP to a computer via a 

LAN network. 

Figure 29: Connecting Multiple AC-825IP Panels to the AxTraxNG Server 

 

The maximum distance from the Ethernet port of the panel to the LAN 

connection is 99.97 m (328 ft). 
When the IP connection is implemented over a WAN, it is then possible to 

communicate with the panel via the Internet with an AxTraxNG client, allowing 

multiple access controllers worldwide to be reached. 
Before connecting a panel by an IP connection for the first time, the AxTraxNG 

software must configure the device. Settings are then stored in the device (see 
the 

AxTraxNG Software Manual for further details

). 

 

Summary of Contents for AC-825IP














































Reviews:

No comments

Brands by name

Popular brands

Load more brands