Assembly Instructions for EZ-PRO H1B / H2B / H3B
1. Carefully remove all parts from packaging:
• 1 Stand
• 1, 2 or 3 PRO H Containers
I. PRO H Lid (1)
II. 6WR PRO Silicon Paddle Wheel (2)
III. Regular Nozzle (3)
IV. Container (4)
V. Name Tag (5)
VI. PRO Handle & Pin (6)
VII. Mini 1.5mm Screw for Handle (7)
VIII. PRO Fresh Lid (8)
2. Remove all PRO H Containers (B) from individual
packaging and foam protection
3. Remove all PRO H Lids (1) from cardboard insert
before discarding container packaging
4. Insert back of container into PRO Stand (A), making
sure it locks into place
Tip:
insert bottom rectangle into frame first,
and snap top rectangle into frame for easiest
and most secure assembly
5. Repeat Step 4 for the remaining containers
6. Fill containers with desired dry product
7. Place all lids on each corresponding container
8. Dispense as you please!
9. Fasten PRO Fresh Lid (8) onto Nozzle when unit is
not in use to maximize the freshness of your dry
goods
(1)
(2)
(3)
(4)
(8)
(6)
(7)
(5)
Assembly Instructions for EZ-PRO H1S/H2S/H3S
1. Carefully remove all parts from packaging:
•
1 Stand
•
1, 2 or 3 PRO S Containers
I. PRO S Lid (1)
II. 6WR PRO Silicon Paddle Wheel (2)
III.
Regular Nozzle (3)
IV. Container (4)
V.
Name Tag (5)
VI. Dispenser Handle & Pin (6)
VII. Mini 1.5mm Screw for Handle (7)
VIII. PRO Fresh Lid (8)
2. Remove all PRO S Containers (B) from individual
packaging and foam protection
3. Remove all PRO S Lids (1) from cardboard
insert before discarding container packaging
4. Insert back of container into Dispenser Stand (A),
making sure it locks into place
Tip: insert bottom rectangle into frame first,
and snap top rectangle into frame for easiest
and most secure assembly
5. Repeat Step 4 for the remaining containers
6. Fill containers with desired dry product
7. Place all lids on each corresponding container
8. Dispense as you please!
9. Fasten Dispenser Fresh Lid (8) onto Nozzle when
unit is not in use to maximize the freshness of
your dry goods
A
B
SERVING SOLUTIONS
