background image

VEA-8707A 

 Analog Video Equalizing Distribution Amplifier User Manual

• Ross Part Number:

 8707ADR-004-01

• Release Date: January 25, 2010. Printed in Canada.

The information contained in this manual is subject to change without notice or obligation.

Copyright

© 2010 Ross Video Limited

. All rights reserved.

Contents of this publication may not be reproduced in any form without the written permission of 
Ross Video Limited. Reproduction or reverse engineering of copyrighted software is prohibited. 

Patents

This product is protected by the following US Patents: 4,205,346; 5,115,314; 5,280,346; 
5,561,404; 7,034,886; 7,508,455. This product is protected by the following Canadian Patents: 
2039277; 1237518; 1127289. Other patents pending.

Notice

The material in this manual is furnished for informational use only. It is subject to change without 
notice and should not be construed as commitment by Ross Video Limited. Ross Video Limited 
assumes no responsibility or liability for errors or inaccuracies that may appear in this manual.

Trademarks

 is a registered trademark of Ross Video Limited.

 is a trademark of Ross Video Limited.

• Ross, ROSS, ROSS

®

 are registered trademarks of Ross Video Limited.

• DashBoard Control System™ is a trademark of Ross Video Limited.
• All other product names and any registered and unregistered trademarks mentioned in 

this guide are used for identification purposes only and remain the exclusive property of 
their respective owners.

Summary of Contents for VEA-8707A









































Reviews: