Ross Synergy 2 SD, Installation Manual

Page: 195 / 414

Synergy Series Installation Guide (v18) Custom Control Basics • 8–19
Programming Special Functions
The following sections describe how to program your custom controls with various other special
functions. Refer to the section “
Editing Custom Control Macros ” on page 8–47 for more
information on inserting events into existing custom control macros.
The following functions are covered in this section:
• Time Clock Functions
• Special Functions
• Copy MLE Custom Controls
• Peripheral Interface II Custom Controls
Time Clock Functions
The Synergy Series Switcher allows you to program custom control buttons with Time Clock
functions.
Use the following procedure to program one or more custom control buttons with special Time Clock
functions.
1. Navigate to the Custom Controls Menu as follows:
• Press
HOME B Custom Controls
.
Custom Controls Menu
2. Select the custom control button you want to record to as follows:
• Use the
Bank
knob to select the custom control bank you want to record the custom
control to.
• Use the Button knob to select the custom control button that you want to record a
custom control macro to. You can also press the desired button directly on the
control panel. Remember that buttons marked with an asterisk (*) or an (@) in the
list have already been programmed.
Note
Refer to the appropriate chapter to learn more about programming
custom controls for specific devices.
Note You must have the Preview Overlay option installed in order to be able
to use the Time Clock feature.
Operating
Tip
As a recommendation, keep Time Clock functions grouped together on
your
physical custom control buttons.