Ross Synergy 100 MD, Operator'S Manual

Page: 293 / 402

Synergy 100 MD Operator’s Manual (v7.2 MD-S100) Squeeze & Tease MD Sequences and Wipes • 17–17
Overwriting a Keyframe
This section outlines how to modify a single keyframe that is not in a chosen range of a sequence. For
example, you have applied a change to the X-position of Keyframes 3 to 5 in a sequence that includes
a total of five Keyframes. You now require to change the Y-position of Keyframe 2 in the same
sequence.
Use the following procedure to overwrite a Keyframe:
1. Ensure the sequence is loaded. Refer to the section “ Loading a Sequence ” on
page 17–20 for instructions.
2. Make your changes to the selected Keyframe parameters.
3. Press 4. Overwrite Keyframe . The keyframe is replaced with the new parameters.
4. Save your sequence as follows:
• Press SEL/DVE and L
OAD
S
EQ
to display the Load/Save Seq. Menu .
• Use the knobs to select a sequence position in the list.
• Press 1. Save Sequence to save the sequence.
This completes the procedure to overwrite a Keyframe using the Overwrite Keyframe feature.