Ross Synergy 100 MD, Operator'S Manual

Page: 102 / 402

6–8 • Pattern and Effects Control Synergy 100 MD Operator’s Manual (v7.2 MD-S100)
System Control Group
The first (hundreds) digit in the display represents the “class” of wipe. You can chose
between the following classes of wipes:
• Class 0 Classic Wipes — Refer to the section “ Classic Wipes ” on page 6–8 for
a list of the available wipes.
• Class 1 Rotary Wipes — Refer to the section “ Rotary Wipes ” on page 6–9 for a
list of the available wipes.
• Class 3 Rotary Wipes — Refer to the section “ Rotary Wipes ” on page 6–9 for a
list of the available wipes.
• Class 4 Rotary Wipes — Refer to the section “ Rotary Wipes ” on page 6–9 for a
list of the available wipes.
The second two digits represent the number of the wipe.
5. Use the 100 button below the display to scroll through the classes. The 10 and 1 buttons
are used to scroll through the wipe pattern numbers, represented by the last two (tens and
units) digits in the display. Refer to the following sections for the available wipe
patterns.
This completes the procedure for selecting a wipe.
Classic Wipes
The following figure illustrates the available “Classic” Wipes – Class 0.
Classic Wipes – Class 0
Note
Matrix and Special Wipes (Classes 2 and 3) are unavailable at this
time.
S Y S T E M C O N T R O L
EDIT
SEL BACK MENU
100 10 1
WIPE
1 3 5
021 022 023 024
011 012 013 014 015 016 017 018 019 020
001 002 003 004 005 006 007 008 009 010