SMA-8018 Serial Monitoring Amplifier
1-7
Specifications
Standard SMPTE 259M-C; 270 Mb/s 525/625 Lines
Input Impedance 75
Ω
, terminating
Return loss > 22 dB to 300 MHz
Common Mode Rejection 4 V p-p @ 60 Hz
Serial Video Input
Equalization Automatic, up to 31 dB
Number of outputs 6 or 7 (jumper selectable)
Standard SMPTE 259M-C; 270 Mb/s 525/625 Lines
Output Impedance 75
Ω
Output return loss
Outputs 1-6 > 18 dB to 270 MHz
Outputs 7 > 17 dB to 270 MHz
Signal Level 800 mV
±
10%
DC Offset 0 V (
±
0.5 V)
Rise & Fall Times 800 pS (
±
15%)
(20 - 80 %)
Serial Video Outputs
Overshoot < 8%
Number of outputs 1 or 2 (jumper selectable)
Output Impedance 75
Ω
Output return loss > 35 dB to 5 MHz
Output Isolation > 38 dB to 5 MHz
Signal Level 1V p-p
±
5%
DC Offset <
±
50 mV
Frequency Response
±
0.05 to 4.2 MHz
-0.6 dB @ 5 MHz
Differential Phase < 0.8 degrees
Differential Gain < 1.8%
Group delay
±
10 ns to 5.5 MHz
Analog Monitoring Outputs
RMS noise (unweighted) -54 dB 0 - 5.0 MHz.
Power Consumption
3.9 W
Specifications are subject to change without notification.
Ordering Information
SMA-8018
Serial Monitoring Amplifier
DFR-8104
Digital Products Frame (1 RU, Holds 4 modules)
DFR-8110
Digital Products Frame (2 RU, Holds 10 modules)
PS-8101
Power Supply (85-250 volts)
EXT-8100
Extender Board
DM-8018
Additional User's Manual for SMA-8018
Note:
All Ross Video Limited terminal equipment frames include one power supply.
A redundant power supply may be installed in all two-rack unit frames if required.
One User's manual is supplied with each frame.
