COMPONENT LIST
1. Detergent container
2. Water supply inlet
3. ON/OFF switch
4. Gun assembly
5. High pressure hose
6. Adjustable lance
7. Cleaning needle
8. Quick connector (Male)
9. Inlet filter
10. Cable holder
11. Turbo lance
12. Fixed brush
13. NA
14. NA
15. Extension adaptor
16. Hose reel handle
TECHNICAL SPECIFICATION
Rated voltage: 230-240~50Hz
Rated power: 2400W
Protection class: 1
Degree of protection: IPX5
Permissible pressure: 180 Bar / 2600psi
Rated pressure: 120 Bar / 1750psi
Supply water temperature: 5-60ºC
Nozzle spray angle: 0-90º
Max output flow rate: 6L/min
Net weight (machine only): 20Kg
Cable length: 5m
Hose length: 6m
Sound Pressure Level: Lpa 85dB
Sound Power Level: Lwa 95dB
Vibration Level: 1.0m/s2
UNPACKING AND ASSEMBLY
CAUTION!
This packaging contains sharp ob-
jects.
Take care when unpacking. This machine could
require two persons to lift, assemble and move this
machine. Remove the machine, together with the ac-
cessories supplied, from the packaging. Check carefully
to ensure that the machine is in good condition and
account for all the accessories listed in this manual.
Also make sure that all the accessories are complete. If
any parts are found to be missing, the machine and
its accessories should be returned together in their
original packaging to the retailer.
Do not throw the packaging away, keep it safe
throughout the warranty period, then recycle if pos-
sible, otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to the
risk of suffocation.
ASSEMBLY
Note: Before carrying out any assembly or
disas-
sembly of the unit please ensure that the unit is not
connected to the electrical supply.
FITTING THE LANCE
Before using the washer fit the lance to the gun.
Grip the end of the gun and screw the lance
on to the gun ensuring it is tight, Fig 1. Do not over
tighten as this could damage both the connectors.
HOSE CONNECTIONS
Connect the high pressure hose connector to the con-
nector on the underside of the gun assembly ensuring
that it is tight,
Fig 2
. Do not over tighten as this could
damage both the connectors.