7
PROPER USE
The chain saw is designed exclusively for sawing wood.
You may only fell trees if you have received the appropriate training.
The manufacturer cannot be held liable for injury or damage caused by improper or incorrect
usage.
Please note that our equipment has not been designed for use in commercial, trade or indus-
trial applications. Your warranty will be voided if the machine is used in commercial, trade or
industrial businesses or for equivalent purposes.
ASSEMBLY
WARNING:
Do not start the engine until the saw is fully assembled.
WARNING:
Wear protective gloves at all times when handling the chain.
Check that the Chain brake is released before proceeding.
Attach the bucking spikes to the front of the
saw body so the spikes point upward.
Fig 4
A
B
Remove the Bar fastening nuts (Fig 3 –18) and
then remove the Chain brake / clutch cover (Fig
3 –21)
Note the position of the Chain tension adjust-
ment screw (Fig 4 –A) and the bar locating pin
(Fig 4-B)
Slip the bar under the edge of the clutch and
then over the mounting studs (Fig 5-A) Check
that the bar locating pin (Fig 4-B) is engaged in
to the hole at the bottom of the bar (Fig 5-B)
Fig 5
A
B
