QRA-8808 User Guide (v5.0)
DashBoard Menus • 23
DashBoard Menus
This chapter briefly summarizes the menus, items, and parameters available from DashBoard for your card. Default
parameters are noted with an asterisk (*).
Wait 30 seconds after the last setting change to ensure all changes are saved to the non-volatile memory of the
card.
Status Tabs
This section summarizes the read-only information displayed in the
Status
tabs. The fields in the
Signal
tab vary in
severity from green (valid), yellow (caution), to red (alarm). DashBoard reports the most severe alarm for a single
field. Alarm colors are noted within the tables as text set in brackets next to the menu parameter name.
Signal Tab
outlines the read-only information displayed in the
Signal
tab.
Table 8.1 Signal Tab Items
Item
Parameter
Description
Channel #
Status
OK (Green)
A valid input signal is detected
No input (Red)
Input signal is not present. The Alarm on Loss of
Input for this channel is enabled.
No input (Green)
Input signal is not present. The Alarm on Loss of
Input for this channel is disabled.
Input
No signal
Input signal is not present
<125mB/s signal
A signal detected at less than 125Mbps is present
<125mB/s signal (backup)
A signal of less than 125Mbps is present from the
backup channel
SD signal
A valid 270Mbps input signal is present
SD signal (backup)
A valid 270Mbps input signal is present from the
backup channel
HD signal
A valid 1.485Gbps input signal is present
HD signal (backup)
A valid 1.485Gbps input signal is present from the
backup channel
3G signal
A valid 2.97Gbps input signal is present
3G signal (backup)
A valid 2.97Gbps input signal is present from the
backup channel
Equalizer bypassed
Input signal is present and the equalizer is
bypassed (the Enable Equalizer check box is not
selected in the Setup tab)
Summary of Contents for QRA-8808
Page 1: ...QRA 8808 User Guide...
Page 6: ......
Page 18: ...18 Using DashBoard QRA 8808 User Guide v5 0...
Page 22: ...22 Software Upgrades QRA 8808 User Guide v5 0...
