Ross openGear SEA-8803, User Manual

Page: 13 / 44

SEA-8803 User Manual (Iss. 02) Introduction • 1–3
Functional Block Diagrams
The SEA-8803 can operate as an equalizing single 1x8 or as a single 1x4. The configuration
depends on the rear module you are using. This section provides the block diagrams for both
configurations.
Single 1x8 Configuration
Figure 1.1 describes the workflow of the SEA-8803 with the 8320AR-300 Full Rear module.
This configuration has the SEA-8803 operating as a single equalizing 1x8 with BNC connections.
Figure 1.1 Simplified Diagram — 1x8 Configuration (8320AR-300)
Single 1x8 Configuration with Bypass Relay
Figure 1.2 describes the workflow of the SEA-8803 with the 8320AR-306 Full Rear module.
This configuration has the SEA-8803 operating as a single equalizing 1x8 with BNC connections.
Figure 1.2 Simplified Diagram — 1x8 Configuration (8320AR-306)
SDI IN
Equalizer
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
OUT 8
SDI IN
Equalizer
OUT 1
OUT 2
OUT 3
OUT 4
OUT 5
OUT 6
OUT 7
OUT 8