5–26 • DashBoard Menus
HDC-8223A(-S) User Manual (Iss. 03)
Admin Tab
The
Admin
tab provides a global card operating status and allows a log download for factory
engineering support. You can also selecting and load card firmware upgrade files.
summarizes the options available in the
Admin
tab.
Caution
— The HDC-8223A(-S) FPGA is designed for a normal-range operating
temperature around 85°C core temperature. Operation in severe conditions exceeding this limit
for non-sustained usage are within device operating safe parameters, and can be allowed by
setting the Thermal Shutdown control to Disable. However, the disable (override) setting
should be avoided under normal conditions to ensure maximum card protection.
Table 5.21 Admin Tab Items
Tab Title
Item
Parameters
Description
Display Name
<text>
Assigns a unique identifier to the card
Display Name Mode
Append to Product Name
Adds the text in the Display Name field to
the standard card name
Replace Product Name
Replaces the standard card name with the
text in the Display Name field
Log Status
(read-only)
#
Indicates overall card internal operating
status
Download Log File
*.tar.gz
Allows a card operational log file to be
saved to a host computer. This log file can
be useful in case of a card error or in the
case of an operational error or condition.
Save
Delete Log File
Confirm
Thermal Shutdown
Enable
Allows the built-in thermal failover to be
defeated.
Disable
Firmware
Upgrade
Controls
Automatically
Reboot After
Upgrade
Selected
Allows a selected firmware version to be
immediately uploaded as outlined in the
section “
Cleared
Firmware upgrade loading is held off until
the card is manually rebooted.
Firmware To Load
v#
Selects the desired upgrade file to be
loaded
v# (Currently Installed)
Load Selected
Firmware
Install
Loads firmware as specified by the
Automatically Reboot After Upgrade
setting
Cancel Pending
Upgrade
Cancel
Cancels the upgrade
Delete Previous
Firmware
Confirm
