Ross NK-RP1 Series, User Manual

Page: 22 / 28

22 • Physical Installation NK-RP1 Series User Guide (v2.0)
To install an NK-R1-NEG power module
1. Align the new NK-RP1-NEG power module with the available slot inside the NK-RP1 chassis, ensuring the
green PCB end is closest to you.
2. Gently insert the new NK-RP1-NEG power module into the available slot.
Figure 3.14 Installing the NK-RP1-NEG Power Module
3. Install the power supply retaining bar as outlined in the section “ To install the retaining bar in the chassis ”
on page 3–20.
4. Install the front door as outlined in the section “ To re-install the door to the chassis ” on page 3–21.