19
•
Photo:
Use the VOL+- buttons to select PHOTO. Press OK. A list of compatible image
files will be shown. If you wish to see all the images as a slide show then press the
PLAY / PAUSE button to start the show (to alter the transition time see SETUP below)
If you wish to view the images one by one then use the CH+- buttons to select the file
you wish to play and press OK to view full screen. Press the NEXT and PREVIOUS
buttons to move backwards and forwards through the available images.
•
File:
This feature provides fast access to the files on your selected device as it shows
all file types. Use the VOL+- buttons to select FILE and press OK. You can then use
the CH+- buttons to select your desired file and then press OK. The receiver will then
playback the file which can be controlled as described above depending on what type
of file it is.
•
Setup:
This feature enables the setting of various parameters within SYSTEM, MOVIE
and PHOTO. Press the VOL+- buttons to select SETUP and then the VOL+- to enter
your choice of setup menu, then press OK.
•
System:
It should
not
be necessary to change any of the settings in this section as
they will have already have been adjusted when you setup the basic receiver to your
preferences.
Care should be taken when making any changes in this section.
•
Movie:
In this section you can adjust:
•
Subtitle Specific;
Size – BIG, NORMAL, SMALL.
•
Subtitle BG;
Alter the subtitle box background colour – TRANSPARENT,
GRAY, YELLOW GREEN, WHITE
•
Subtitle Font Colour;
White, Blue, Green, Yellow
•
Resume Play:
ON or OFF
Use the CH+- buttons to select and the VOL+- to select your preference.
Press EXIT to save.
•
Photo:
In this setup menu you can adjust the transition time between slides when
viewing a photo slide show. Use the VOL+- buttons to select the transition time
between 2, 3, 5 and 7 seconds. Press EXIT to save your choice.
5.5.2 Software Upgrade
This feature is not currently available but may be utilised in future software versions. To
upgrade the Software please refer to Section “7.0 Software Update”.
5.5.3 Database Backup
This feature enables a back up of all your Channel Information to be taken which can
then be used to restore the information should it become lost or corrupted. The Database
Backup File is always stored in the first partition of the USB Device connected to the rear
USB Port in a folder named “Database”. Press CH+- to select DATABASE BACKUP then
press OK. The back up file will then be created automatically.
