Ross GearLite SRA-9601, User Manual

Page: 19 / 24

SRA-9601 User Guide (v3.0) Cabling • 19
Cabling
This chapter provides an overview of connecting external devices to the SRA-9601.
SDI Cabling
Connect the digital outputs as required from the SDI BNCs. Refer to Figure 5.1 and the chassis silk-screen label for
cabling designations.
Figure 5.1 SRA-9601 — SDI Connections
Power Adapter and Supply
Connect the PS-9000 power adapter to the power supply connector. The PS-9000 provides reg5V DC (5%)
@ up to 2A. The DC power cord has a locking connector that securely fastens into the power supply DC jack on the
SRA-9601. The SRA-9601 has a standard miniature power jack (center pin positive).
Caution
— Use of improper adapters may damage the SRA-9601 and will void the warranty.
POWER
INPUT
B GAIN
A GAIN
AES
INPUT
-+
A2
OUT
-+
A1
OUT
EQUALIZER
RECLOCKER
INTERPOLA
TE &
OVERSAMPLE
24-BIT
DAC
SRA-9601
3G/HD/SD
RECLOCKING DISTRIBUTION
AMPLIFIER
OUT 4
OUT 3
OUT 2
OUT 1 SDI IN
PWR
SDI
SDI IN
SDI OUT 4
SDI OUT 3
SDI OUT 2
SDI OUT 1