Ross GearLIte DAC-9213-R, User Manual, Page: 19 / 28

Configuration (Iss. 04) • 18
In Auto Detect mode, the module will attempt to detect any of the supported
incoming High Definition or Standard Definition SDI video standards. Refer to
Table 3 for supported standards. When a supported standard is detected, the
appropriate analog output format is selected. If the module is unable to
determine the input standard, the
STATUS LED will flash and the module will
mute the analog outputs.
Note
— If Disable Auto Mute is set to On with an input/output
mismatch, the DAC-9213-R will output an invalid signal and the
STATUS LED will flash.
Output Video Format
Use this menu to select the output component video format. Note that not all
output formats support all SDI input signal standards. For example, RGB
(NTSC Related) is only supported on 525i. Refer to
Table 3 for a complete list
of supported formats vs. input standards.
Table 3 Supported Formats and Input Standards
Digital
Input
Standard
Signal
Analog Output Format
RGB
YP
B
P
R
SMPTE/
EBU N10
MII
NTSC
Related
SMPTE/
EBU N10
525i
Y/G (setup) 0 to 700mV
0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV)
0 to 700mV
P
B
/B (setup)
0 to 700mV
0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV) -350mV to
+350mV
P
R
/R (setup)
0 to 700mV
0 to 700mV
(54 to 700mV)
0 to 714mV
(54 to 714mV) -350mV to
+350mV
Sync 0 to -300mV 0 to -300mV 0 to -286mV 0 to -300mV
625i
Y/G 0 to 700mV 0 to 700mV
P
B
P
R
/RB
0 to 700mV
-350mV to
+350mV
Sync 0 to -300mV 0 to -300mV
HD
(1080i,
720p)
Y/G 0 to 700mV 0 to 700mV
P
B
P
R
/RB
0 to 700mV
-350mV to
+350mV
Sync -300mV to +300mV
-300mV to
+300mV