Ross GearLIte DAC-9213-R, User Manual, Page: 15 / 28

Setup (Iss. 04) • 14
Note
— For cabling convenience, a 3-BNC molded analog output
cable is available from Ross Video. For monitors with RCA inputs,
Ross Video also has available RCA to BNC adapters. Contact your
GearLite sales representative for cable ordering details.
Status and Selection LEDs
The front edge of the DAC-9213-R has four LED indicators that display the
status of the input signals, and indicate menu function and configuration
selections. (
Figure 6 )
Figure 6 DAC-9213-R Front Edge Status Indicator LEDs
Table 1 describes the status LEDs available on the DAC-9213-R.
Table 1 Status LED Descriptions
LED Color Function
POWER
Green
When lit, this LED indicates that the DAC-9213-R is
powered on.
Off
When unlit, this LED indicates a loss of power to the
DAC-9213-R.
STATUS
Green
When lit, this LED indicates a valid
a
input signal is
present and no errors are detected. The DAC-9213-R is
functioning correctly.
a.*A valid signal is defined as any analog composite video signal standard input into the
DAC-9213-R, which matches the setting of the Video Standard that has been selected in the
Function Setup and Configuration Menu. In other words, if the converter is in its default state
for NTSC (525/60) video, then only an NTSC (525/60) composite video signal input will
cause the OK LED to be lit. Any other analog composite video signal, of a different standard
(PAL-B, PAL-M, PAL N), that is input into the converter will be invalid.
Flashing
Green
When flashing green, this LED indicates an input signal
problem or an inconsistency between the SDI input
standard and the selected output format.
Off
When unlit, this LED indicates a loss of power to the
DAC-9213-R.
UP
Yellow For menu items that have multiple selections, these
LEDs will be in a state as indicated in the Function
Setup and Configuration Menu.
DOWN
Yellow
POWER LED
STATUS LED
012
34
56
789AB
C
D
E