DAC-8013A User Manual (Iss. 01)
User Controls
•
3-3
JP4
⎯
525 Setup
JP4
– 525 Setup
enables or disables the YPrPb setup in 525 line formats.
Select one of the following settings:
•
ON
•
OFF
— This is the default setting.
JP5
⎯
Sync On RGB
JP5
– Sync ON RGB
enables or disables sync on the RGB outputs.
Select one of the following settings:
•
ON
— Adds Sync to the RGB signals.
•
OFF
— Sync will not be present on the RGB signals. This is the default setting.
JP6
⎯
BNC 1 Output
JP6
– BNC 1 Output
selects the output for BNC 1.
Select one of the following settings:
•
SYNC 2V
— Provides 2 V p-p sync for equipment that require it.
•
SYNC 4V
— Provides 4V p-p sync for equipment that require it.
•
Composite
— Provides a composite signal for monitoring. The
DAC-8013A
uses
the required NTSC or PAL signal to match the input signal. This is the default
setting.
Input Status LED
The front edge of the card includes an LED indicator which shows the input status of the card. This
section provides information on the LED indicator of the
DAC-8013A
card.
Figure 4. Input Status LED Location