Ross ADA-8405-C, User Manual

Page: 19 / 36

ADA-8405-C User Manual (Iss. 02) Installation • 2–5
Cabling for the ADA-8405-C
This section provides information for connecting cables to the installed Rear Modules. Connect
the input and output cables according to the following sections.
DFR-8310 Series Frame Cabling Overview
The ADA-8405-C is used with the following Rear Modules:
• 8310AR-042 Full Rear Module — Each module occupies one slot and accommodates
one card. This rear module provides two analog inputs, and eight analog outputs. ( Figure
2.2 )
DFR-8321 and OG3-FR Series Frame Cabling Overview
The ADA-8405-C is used with the following Rear Modules:
• 8320AR-042 Full Rear Module — Each module occupies two slots and accommodates
one card. This rear module provides two analog inputs and eight analog outputs. ( Figure
2.2 )
• 8320AR-043 Split Rear Module — Each module occupies two slots and accommodates
two cards. This rear module provides one analog input and four analog outputs per card.
(
Figure 2.3 )
Figure 2.2 Cable Connections for the 8310AR-042
and 8320AR-042 Full Rear Modules
Figure 2.3 Cable Connections for the 8320AR-043
Split Rear Module
ANLG In 2
ANLG Out 2-1
ANLG Out 2-2 ANLG Out 1-2
ANLG Out 2-3 ANLG Out 1-3
ANLG Out 2-4 ANLG Out 1-4
ANLG Out 1-1
ANLG In 1
ANLG In
ANLG Out 1
ANLG Out 2
ANLG Out 3
ANLG Out 4 ANLG Out 4
ANLG Out 3
ANLG Out 2
ANLG Out 1
ANLG In