User Manual
For Wireless Access Point
WAP-348x
STATEMENT
General Statement
All the contents of this document are protected by law, without permitted by ROSIM,
any organization or individual should not copy or transmit this document in any way.
We’ve tried our best to make this specification accurate, but mistakes are still
unavoidable. The contents of this document are being checked periodically, your
suggestion will be appreciated.
The contents of this specification are accordant to the corresponding products.
Please keep attention to our website
www.rosimits.com
for any updating information,
which may not be informed of you in advance.
To make sure operation correctly, please read this user manual carefully before
installing. We are not responsible for any problems or damage caused by incorrect
operation.
Operation specifications issued by traffic department or related authorities should be
followed when installing, for example place traffic barriers and traffic indicator
correctly, operators wear special cloth, etc. We are not responsible for the personal
security of products installation.
ROSIM reserves all the rights of final interpretation.
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
