ROSIERES RFE9163/1MIN, Use And Maintenance Instructions

Page: 27 / 100

All work on the appliances must be carried out by qualified personnel.
For maintenance, moving, installation and cleaning of the appliance use suitable
prevention and protection equipment (gloves, etc.).
Lifting and moving of appliances weighing more than 25 kg must be carried out using
proper equipment, or by two persons, in order to avoid risks or injuries.
2 5
If the cord is damaged, replace it right away as follows:
- Open the terminal box cover, remove the power cord and replace it with one
having the same characteristics and suitable for the appliance's load.
- This operation must be carried out by a qualified technician.
- The earth wire (yellow/green) must absolutely be about 10 mm longer than the
power line wires.
Attention:
should it be necessary to replace the supply cord, connect the wire in accordance with
the following colours/codes:
BLUE - NEUTRAL (N)
BROWN - LIVE (L)
YELLOW-GREEN - EARTH ( )
Preparation of the oven and pre-use
Attention: the oven must be unplugged from the electrical mains. Before using the oven,
carefully clean the interior, the racks and the drip pan with non-abrasive soap and
lukewarm water. Insert the racks and the drip pan into their respective runners. When this
operation is complete, plug the oven into the electrical mains and bring it up to maximum
temperature for at least 20 minutes in order to eliminate any residual grease, oil or resins
from manufacturing which may cause unpleasant odours during cooking; then ventilate
the room.
After completing this simple operation, the oven is ready to cook for the first time.