1 4
INSTALLATION - SETTING
SETTING THE HOB JETS (right side) :
To reach the jets on the hob, you must :
- remove the pan support,
- remove the burner caps and heads,
- unscrew jets with special spanner supplied with cooker.
GAS CONVERSION : The appliance is set for the type of gas noted on the packaging and
rating plate. To convert to another type of gas it is necessary to :
- Fit the correct jet,
- Adjust or remove the air tubes,
- Set the idling flame.
JET SIZES :
G20 10 mbar
G31 27,5 mbar
SEMI-RAPID (front left)
110
72
RAPID (rear left and front right)
140
85
ULTRA-RAPID (rear right)
160
100
A bag containing jets, spanners etc..., is included with the cooker.
The appliance must be connected to the Gas supply by a competent Gas fitter.
We recommend the use of a suitable flexible connection hose which complies with the
regulation currently in force. This will significantly ease installation and any future service
operations that may be necessary.
If the appliance is to be installed adjacent to kitchen furniture it is necessary to provide a 1.5
cm air space on the left side. The furniture must also be capable of withstanding a minimum
of 90°C in the case of such installations.
INSTALLATION - CONNECTION
spanner
jet
Summary of Contents for 4040 DB AUS
Page 1: ...1 OPERATING INSTRUCTIONS COOKER 4040 DB AUS ...
Page 19: ...19 ...
