300M Wireless Router
RNX-N300RT
- 35 -
USER MANUAL
Password
- If the AP your Router is going to connect needs password, you need to fill
the password in this blank.
Wireless Security
Choose menu
“
Wireless
→
Wireless Security
”, you can configure the security settings of your
wireless network.
There are five wireless security modes supported by the Router: WEP (Wired Equivalent Privacy),
WPA (Wi-Fi Protected Access), WPA2 (Wi-Fi Protected Access 2), WPA-PSK (Pre-Shared Key),
WPA2-PSK (Pre-Shared Key).
Figure 4-18 Wireless Security
Disable Security -
If you do not want to use wireless security, check this radio button. But it
’s
strongly recommended to choose one of the following modes to enable security.
WEP -
It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-19.
