5
User Manual
ATA-133 2 Port PCI Adaptor without RAID
RC208
. Install the board and follow Microsoft procedures to install Windows NT 4.0 accordingly.
2. At the Windows NT Setup screen, press F6 to specify and add the driver.
3. Press S, select Other, then press Enter.
4. Insert the driver diskette and press Enter.
5. Select Silicon Image SiI 0680 ATA/33 Controller and press Enter.
6. Press Enter to continue and follow on-screen instructions to complete Windows NT 4.0
installation.
For Existing Windows® NT 4.0 Installation
. Install the board and boot up Windows® NT 4.0.
2. Double click My Computer/Control Panel/SCSI Adapters, then click Drivers tab.
3. Click Add… then Have Disk…
4. Insert the driver CD, type D:\PCI_IO\Cmd0680\ide33 (Note: “D:\” represents the drive
letter assigned to the CD-ROM drive you are using. If D is not letter of your CD-ROM drive,
substitute D with the correct drive letter), then click OK
5. Highlight Silicon Image SiI 0680 ATA/33 Controller and click OK.
6. Click OK, restart Windows NT 4.0 to complete driver installation.
To Verify Windows® NT 4.0 Installation
. Double click My Computer/Control Panel/SCSI Adapters.
2. Highlight Silicon Image SiI 0680 ATA/33 Controller from SCSI Adapters listing and click
Properties. A message this device is working properly is displayed in the dialog box, the driver
has been correctly installed.
For Windows® 2000
For New Windows® 2000 Installation
A new installation requires a floppy disk for the driver installation. To make this floppy disk,
copy the contents of the “PCI_IO\Cmd0680\ide33” folder, found on the driver CD, onto a
blank floppy disk then follow the directions below.
. Install the board and follow Microsoft procedures to install Windows 2000 accordingly.
2. Restart your system when prompted during Windows’ installation.
3. At the Windows 2000 screen, press F6 to install the driver.
4. Insert the driver diskette. Press S, then press Enter.
5. Select Silicon Image SiI 0680 ATA/33 Controller and press Enter.
6. Press Enter to continue and follow on-screen instructions to complete installation.