3
User Manual
ATA-133 2 Port PCI Adaptor without RAID
RC208
Driver Installation
For Windows® 98 SE
For New Windows® 98SE Installation
. Install the board and follow Microsoft procedures to install Windows® 98 SE accordingly.
2. Once Windows has been installed, right click My Computer and click Properties.
Select Device Manager tab.
3. Double click PCI Mass Storage Controller listed under Other Devices.
4. Select Driver tab, then click Update Driver button.
5. Insert the driver CD into the CD-ROM Drive and click Next.
6. Select Search for the best driver for your device(Recommended) from the following dialog
box and type D:\PCI_IO\Cmd0680\ide33 (Note: “D:\” represents the drive letter assigned
to the CD-ROM drive you are using. If D is not letter of your CD-ROM drive, substitute D
with the correct drive letter), then click Next.
7. Click Next again, then Finish.
8. Restart Windows to complete driver installation.
For Existing Windows® 98SE Installation
. Install the board and boot up Windows® 98SE.
2. At the Add New Hardware Wizard, click Next.
3. Select Search for the best driver for your device and click Next.
4. Insert the driver CD into the CD-ROM Drive and click Next.
5. Select Search for the best driver for your device(Recommended) from the following dialog
box and type D:\PCI_IO\Cmd0680\ide33 (Note: “D:\” represents the drive letter assigned
to the CD-ROM drive you are using. If D is not letter of your CD-ROM drive, substitute D
with the correct drive letter), then click Next.
6. Click Next again, then Finish.
7. Restart Windows to complete driver installation.
For Windows® ME
For New Windows® ME Installation
. Install the board and follow Microsoft procedures to install Windows® ME accordingly.
2. Once Windows has been installed, right click My Computer and click Properties. Select
Device Manager tab.