Operation and maintenance manual
Hoof trimming chute operation manual
- 9 von 22 -
Rev.: 01/2022
– We reserve the right to make technical modifications
Before disconnecting or parking the machine use chocks to prevent it from rolling off.
Avoid bumpy terrain or slopes which may cause the device to slip, tip over or overturn.
2 Transport
Three different possibilities are provided for changing the location of this hoof trimming chute.
Other variants that deviate from the ones described offer a high potential of danger and are
not permitted!
2.1 Transport with tractor on three-point linkage
The following describes the procedure for transporting the hoof trimming chute with a tractor
and the risks to be observed.
The three-point hitch on the hoof trimming stand is not fitted as standard.
2.1.1 Mounting the hoof trimming chute to a tractor
To transport the hoof trimming chute with the tractor, the head catch must first be brought
into the catching position (power supply necessary!).
Lower linkage Cat. II is achieved when the catching
doors are almost parallel to the outer bars of the
ground.
Then the chute is attached to the lower link of the
tractor's hydraulics using the optional lower link pins
and to the upper link mount of the tractor using the
optional 3-point linkage chain. At least two chain links
must hang down inwards on the chain slots in which
the chain is suspended on the claw care stand!
WARNUNG
Reverse the tractor to the chute, making sure that there are no persons in the danger zone
between the tractor and the chute!
