B. Mounting of Components (cont)
NOTE:
The screws used to mount the arm to the
junction box could vary in length depending on the
style of installation, and thus are not included in the
kit. Before mounting the FPD assembly, remember
to connect the silver D-9 connector to the signal
cable and tighten the backshell retainer screws
C. Installing Tuner Module
Place tuner module in desired location.
Mounting the tuner module is done with four
installer-supplied screws. Before mounting the
tuner module, make sure that all required cables
will reach your chosen location. Also make sure
that there is sufficient clearance on the sides for
all the connectors to properly plug into the tuner
module.
Page 8
Amp
Audio
out
L
Line
R
Out
Power
12 volt
Cable In
Monitor out
Tuner Module
Part # 9200-0101-200
Installing Your Milan (cont.)
All manuals and user guides at all-guides.com
